18
Function
: Graphics command (only EZ/4).
Parameter : xx.= the data represent one line of graphic pattern, each x is 8 bits binary data (1= black, 0=
white); always 104 bytes.
Example
:
LAAAAA........AAA
LAAAAA........AAA
LAAAAA........AAA
LAAAAA........AAA
104 BYTES
Buffer mode Command
The buffer mode starts when the printer receives the buffer mode begin command Esc B. In the buffer mode
the printer stores the lines of commands for a label into the printer buffer, then prints multiple copies of the label
without pause. Only the label formatting commands can be stored into the printer buffer.
1. Esc B
Function : Begin to Store data in buffer.
2. Esc E
Function : Ending of buffer mode.
3. Esc Pnn
Function
: Set the quantity of labels to print.
Do not send
a CR/LF at the end of the command.
Parameter : nn = 01~99
4. Esc pnnn
Function
: Set the quantity of labels to print.
Be sure to send
a CR/LF at the end of the command.
Parameter : nn = 100~999
5. Esc P00
Function
: Allow repeat printing of the same label by pressing the feed button. If you use strip function, this
command can re-print the same label by removing the loose label detected by the sensor.
Example
:
←
B
←
S2
←
D5
←
Q128
←
?3
←
M18
←
A12
—
TEST
↵
←
{1234}
↵
←
M28$100.00
↵
←
E
←
P00
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
