5
Control unit
07
The control unit for the Godex applicator arm is connected to the printer via the applicator
interface of the printer and provides controls to start printing and applying labels either
manually or using the product sensor.
6
Controls
Front Panel
PRINT:
Allows one label to be printed regardless of the position of the
RUN – STOP
switch
RUN – STOP:
Starts or stops automatic label application. In the ON position, labels will be
applied automatically when the product sensor is triggered. In the OFF position,
labels are not applied when the sensor is triggered.
BLOCK DELAY:
Used to prevent multiple labels being applied to the same product caused by
false reading of the product sensor. During the time period set by the BLOCK
DELAY control, the product sensor will be ignored after the initial triggering of
the sensor. For example if a product has irregular shape or colour/pattern which
could cause the sensor to be triggered more than once for the same product.
PRINT LED:
Illuminates during printing
BLOCK LED:
Illuminates during blocking of input from product sensor
Size: 90 x 40 x 110mm
Max. power: 2W, power is taken from the printer via the applicator interface
Weight:
100g
