18
4.2 Connect SkyGE-400S to a server PC
1. Securely fix PCI-E card on PCI-E or PCI bus of desktop PC via bracket screw.
2.
As above figure, connect J1(red arrow) with 5/12V 4 Pin power connector of
PC power supply. Please be careful on the connection although the
connector is fool-proofing. Wrong connection will make PCI-E card being
damaged! One site with red round label on J1 needs to be connected to 5V
(red wire) and the other J1 site with yellow round label needs to be
connected to 12V (yellow wire).
Once PC power is on, red LED of PCI-E card
will be solid on.
3. As above figure, connect JP1 to 4 pin USB header of the server PC with the
supplied USB cable. Red wire of the USB cable needs to be connected to VCC(5V)
and black wire of the USB cable needs to be connected to GND. Please pay
attention to the VCC/GND indication near JP1 of PCI-E card.
If the USB cable is
not correctly connected, PCI-E card won’t be found by PC system and is
possibly damaged.
Below figure is motherboard USB connector. There are
usually 10 pins for USB connector, Pin 9, 10 should be left open.
Summary of Contents for SkyGE-400S-PCI-E
