Gocycle Service Document: G2 Servo 1.0
October 2014 © Karbon Kinetics Limited. All Rights Reserved.
13
4.8.
With the Cable
Guide Upper removed.
4.9.
Pull the wires out
of the Cable Guide Lower
to reveal the heat-shrink-
wrapped section. These
wires are the Servo
Controller Cable (with the
flat black connector) and
the Rear Sensor Cable
(with the white connector).
4.10.
Use a sharp blade
to very carefully cut off the
shrink-wrap, taking care
not to damage the wires
underneath.
