Assembly Guide: Gocycle Front Pannier
© Karbon Kinetics Limited. All Rights Reserved.
7
IMPORTANT NOTE: The above assembly steps must be carried out in the order described.
Failure to do so may result in damage to the Gocycle.
If you have any further queries or comments, please contact Gocycle Technical Support:
If the mounting bracket is too
loose
, turn each of the 2
adjustment bolts ½ a turn
clockwise
.
Both bolts must be adjusted
equally to provide even
tension when closing the
latch.
The hook features will shorten
or lengthen depending on how
the adjustment bolts are
turned.
3.6. Close the hinged
mounting bracket as shown
3.7 Check that the Gocycle
Front Pannier can be mounted
to the Gocycle, ensuring that
the latch operates correctly as
shown. The latch should begin
feel tight at 45 degrees below
horizontal and close firmly
against the handlebar stem. If
required, re-adjust the
mounting bracket as
described.
Hook Features
