Assembly Guide: Gocycle Front Pannier
© Karbon Kinetics Limited. All Rights Reserved.
5
2.4.
This shows the Gocycle
Front Pannier mounted to
the Gocycle and with the
latch in the closed position.
2.5.
Attach the Velcro
safety strap around the
handlebar stem as shown.
Ensure the Velcro safety
strap holds the Gocycle
Front Pannier securely to the
handlebar stem.
Note:
Never ride with the
Velcro safety strap not
secured as shown!
2.6.
Gocycle Front Pannier
fitted and Gocycle ready to
ride.
Removal is the reverse steps
of fitting.
IMPORTANT NOTE: Whilst holding the Gocycle handlebars wiggle the Gocycle Front Pannier to
determine if there are any loose joints. If the Gocycle Front Pannier is loose, do not ride the Gocycle.
You will need to adjust the mounting bracket as described in the following section.
IMPORTANT NOTE: The ride handling will be different with the Gocycle Front Pannier attached and
will vary depending on the type and weight of load. Ensure any loads are evenly distributed and
secured within the Gocycle Front Pannier such as with extra padding to take up empty space. It is
not safe to ride with a load that is free to move, shift, roll, or flop around within the Gocycle Front
Pannier.
IMPORTANT NOTE: Do not ride with the shoulder strap attached to the exterior of the Gocycle Front
Pannier. Whilst riding, the shoulder strap should be detached from the buckles and stowed securely
inside the Gocycle Front Pannier.
