Assembly Guide: Gocycle Front Pannier
© Karbon Kinetics Limited. All Rights Reserved.
6
3.
A
DJUSTING THE
L
ATCH MECHANISM
3.1. The latch should begin to
feel tight to close from 45
degrees below horizontal
generally at the point as
shown. If the latch is “too
tight” or “too loose”, it
requires adjustment as
described below.
3.3. Remove the Gocycle
Front Pannier from the
Gocycle handlebar stem and
open the hinged mounting
bracket as shown.
3.4. Fold the hinge so that it
is open and flat as shown
allowing access to the
adjusting bolts.
3.5. Use the 4mm Allen key
(similar to the seat post
height adjustment Allen key)
to tighten or loosen the
mounting bracket.
If the mounting bracket is too
tight
, turn each of the 2
adjustment bolts ½ a turn
anticlockwise
.
Too loose
Too tight
