4
Getting Started
Inserting the Memory Card
The eReader supports microSD cards in both FAT and NTFS file
systems. NTFS is needed to copy files larger than 4GB.
To insert a memory card:
•
Check that the microSD card is in the correct position with the
contact pin facing upwards as illustrated below. You may
damage the card and the eReader if the card is not inserted
correctly.
•
Push the card into the card slot until it clicks.
•
To remove the card, push the card once again until it clicks.
•
When a card is inserted or ejected from the eReader, it may
take few seconds for the eReader to update the content.
•
Please avoid inserting or ejecting a card when other operations
are taking place as this may cause the system to hang.
•
Do not remove the card if the content on the card is being
played. This will halt the operation of the eReader and cause
the eReader to restart.
•
If the system stops responding, press and hold the <Power>
button for 6 seconds to reset and turn it off.
Limitations with NTFS file system:
•
eBooks stored on the microSD card are not recognized by the
kalahari.com eReader software when connected to a PC.
•
Direct copying of files from internal memory to the card is not
supported.
5
Getting Started
Starting from Home Menu
When the eReader is turned on, you will enter into the Home
Menu.
•
•
•
•
•
Library
•
•
Battery Indicator
•
•
Page Number
•
•
Time & Date
•
•
•
•
•
1. Continue Reading
Displays the page of the last read
eBook. Press the <OK> button to
open the last read page.
2. Library
Displays the list of available
eBooks. Move the cursor to the
desired book and press <OK> to
open it.
3. Battery Indicator
Displays battery status during
operation.
4. Page Number
Displays the current page number
and total available pages.
5. Time & Date
Displays the current time and
date, you can set this in the
[Settings] menu.
6. File Directory
Indicates the location where the
file is stored. SD – SD card, INT –
internal memory.
