7
Step 3:
Extend jack by turning jack handle counter-
clockwise
until upper jack bracket is aligned with holes in lower
extension arm.
IMPORTANT
Attach upper end of jack to lower extension arm by extending
the jack; DO NOT swing arm to make the attachment.
Step 4:
Attach upper end of jack to lower extension
arm
using the following: one upper jack pole bolt, two flat
washers, two nylon washers, two spacers and a locknut. Tighten
with a
3
/
4
” wrench and socket.
NOTE:
DO NOT
over-tighten. Snug
tighten only.
Jack attachment
WARNING
Two or three people in good physical condition and capable of
lifting at least 90-100 lbs. (40-45 kg) each are recommended
for safe installation and assembly.
IMPORTANT
The jack is packaged with the pole.
Step 1:
Unpack the jack.
Step 2:
Attach lower end of jack to bracket on pole
using one lower jack pole bolt, two flat washers, four nylon
washers and a locknut. Tighten with a
3
/
4
” wrench and socket.
NOTE:
DO NOT
over-tighten. Snug tighten only.
HARDWARE:
TOOLS:
3
/
4
” Socket,
3
/
4
” Wrench, Rubber Mallet
1
/
2
” Nylon
Washer (6)
1
/
2
” Flat
Washer (4)
1
/
2
” Locknut (2)
1
/
2
”
Spacer (2)
Step 2
Lower
Extension
Arm
Upper
Extension
Arm
Step 4
Locknut
Flat
Washer
Upper Jack
Pole Bolt
Lower Jack
Pole Bolt
Nylon
Washer
Spacer
Step 3
Flat
Washer
Nylon Washer
Flat
Washer
Flat
Washer
Locknut
1
/
2
”
x 8” Upper Jack Pole Bolt (1)
1
/
2
” x 4” Lower Jack Pole Bolt (1)
