NOTE
: Two brackets (#1 & #2) are required. Bracket #1with three holes goes on top of bracket #2.
#1
Protective Surface on this
side will face the back of
the pole.
#2
#7
Washers
#7
Washers
INSERTING #6 POLES TO YARD GUARD BRACKETS
#2
#2
#6
#6
YARD GUARD BRACKET
Detail A
A.
Before assembly peel and stick washers to Brackets
#1 & #2 as shown in
Detail A.
Detail B
B.
To insert tube #6 in brackets
slide down
and
rotate
tube into position until the holes in the
bracket
,
washer
and the
tube
line up. See
Detail B-D.
Hole
in tube
Hole
in tube lines up with
washers and bracket holes.
NOTE
: When inserting tube into bracket it
will be a
tight fit
, this is normal and will
provide stability to the assembly.
Detail C
Detail D
NOTE:
DO NOT
ATTEMPT TO JUST PUSH AND
SLIDE INTO PLACE, THIS WILL BE EXTREMELY
DIFFICULT AND COULD DAMAGE PRODUCT.
FOLLOW INSTRUCTIONS BELOW ON HOW TO
SLIDE AND ROTATE INTO PLACE.
3
