9. There are 5 straps #19 used to secure the Yard Guard to
your pole as shown in
. Center the space between
Detail 7
the two clips on the back of the pole. Pull each Velcro
side towards the front of the pole, going
the inner
through
most net squares and secure at the front. Starting
approximately 16” From the base, continue this process at
about 12” increments, until all 5 are used. Refer to Detail
8 - Detail 10.
FRONT VIEW
Detail 8
Detail 11
FRONT
OF POLE
10. T
he lower pad of the Goalrilla pole pads are not
compatible with the Yard Guard, you will need to
replace with the provided lower pad #20 and then
place your existing Goalrilla pad on top as normal.
(Straps can go through inner most net squares)
Your Yard Guard is now complete! It is in the deployed
position. To store it, during non-play, bad weather, of
rough play follow the steps in the next page.
Detail 7
Detail 9
BACK OF POLE
Detail 10
#20
FRONT OF POLE
FRONT OF POLE
19
FRONT OF POLE
BACK OF POLE
11
