GOALRILLA DC72E1, Owner'S Manual

Page: 15 / 18

15
1 3M-8947-00 6” X 8” Tube Plug 1
2 1A-7685-01 Post Assembly 6” X 8” 1
3 2B-6093-02 1/2 Flat Washer 18
4 2B-6095-02 1/2-13 Nyloc Locknut 6
5 3M-6245-00 1 1/4 Dia. Plastic Washer 22
6 1A-7656-00 Upper Board Arm 1
7 1B-7026-00 1/2-13 X 11 1/2 Hex Bolt 2
8 1B-6989-00 5/8-11 X 11 1/2 Hex Bolt 1
9 3M-6893-00 1 9/16 X 3 5/32 Tube Plug 4
10
11
1A-7682-01 Lower Board Arm 1
12 3M-8936-00
13 3M-6892-00 Actuator Cap 1
14 8S-6895-00 1
15 2M-6524-00 Actuator Sleeve 1
16 4A-7810-00 Actuator Square 1
17 4L-8143-00 Height Decal DC72E1 1
18 2B-6094-02 1/2 Split Lock Washer 2
19 1B-6215-02 1/2-13 x 1 Hex Bolt 2
20 1B-6486-11 1/2-13 x 1 1/2” Hex Bolt 2
21 3M-6466-00 Rim Pad - 5 x 5 1
22 7B-6391-00 Step Bushing 4
23 6A-7528-00 Backboard Assembly - 42” x 72” 1
24 1A-7683-01
25 1A-7684-01
26 2B-6289-00 8
B6101W PARTS LIST
Part # Description Qty . Key# Part # Description Qty .
2L-7252-00
Key#
Middle Board Arm 1
Rim Beam 1
1B-6993-00 1/2-13 X 4 1/4 Hex Bolt 2
Radius Tube Plug 40 X 80 mm
2
3/8 X 19mm Flat Washer
Pivot Tube
CARE AND MAINTENANCE
BACKBOARD CARE AND MAINTENANCE
Items needed to clean backboard:
100% cotton soft cloth, (only) Glass cleaner
Clean backboard using only a 100% Cotton soft cloth and glass cleaner. Clean glass as you would clean household windows. Strong cleansers will
damage backboard and void warranty.
RIM
Only hang from the rim briefly to regain balance or avoid injuring others. Release the rim as soon as safely
possible.
Rims are not warranted for any defects other than workmanship. Torn back plates, damaged springs, bent rings, damaged eye bolts, and torn
or distorted rim supports result from hanging on the rim and are not warranted.
The goal should not be cranked over 10'. Adjustments of the goal should be done under adult supervision.
When attempting slam dunk activity you should always wear a mouth guard to avoid dental injury.
RUST
MAINTENANCE
To ensure ease of operation, lubricate all pivot points at least every 6 months or as needed with a good lubricant such as WD-40.
Inspect your pole periodically, if rust should appear
, remove loose paint, sand lightly, primer and paint with exterior flat matte finish
enamel paint.
27 3M-6833-00 Goal Spacer Plate (Pre-Installed) 1
28 6A-6328-02 Goal Assembly 1
29 1B-7025-00 3/8-16 X 2 Carriage Bolt 4
30 3F-6010-00 Net 1
31 2S-6421-00 Rim Cover Plate 1
32 1B-6238-01 #8 X 1/2 Self Tapping Screw 4
33 2B-6238-01 3/8-16 Nyloc Locknut 8
34 3M-6469-00 5/8 Thread Protector 4
35 2B-6097-02 5/8-11 Hex Nut 12
36 2B-6099-02 5/8 Split Lock Washer 4
37 2B-6098-03 5/8 Flat Washer 10
38 2S-6494-01 Anchor Plate 1
39 2B-6096-01 5/8-11 X 18 “J” Bolt 4
40 1S-6152-00 #3 X 40 Rebar 4
41 7B-6287-00 Pull Pin 1
42 4A-6782-00 Actuator Handle 1
43 2L-7252-00 This Manual 1
44 3M-6895-00 Post Pad 1
45 2B-6237-01 4
46 1B-7024-00 3/8-16 X 3 1/2 Hex Bolt 4
47 2B-6242-01 1/2-13 Nylon Locknut (thin) 2
48 3M-6894-00 Board Pad Right
49
3M-6894-01 Board Pad Left
50 3M-8948-00 Radius Tube Plug 50 X 100 mm
51 1B-6999-00 #10 X 1 1/8” Phil. Hex Head Screw
1
2
8
1
52 1B-7022-00
53 3M-8931-00 5/8 Flat Plastic Washer
4
54 2B-6304-00 5/8-11 Nylon Lock Nut (thin)
1
3/8 X 1 3/8” OD Flat Washer
55 3M-6464-00 2 X 4 Tube Plug
2
1/2”-13 X 4 3/4 Hex Bolt 2
56 3M-8950-00 5/8 Plastic Washer (peel & stick) 4