BlueSense
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 8 / 55
www.go-sys.de
2 Technical data and connection diagrams
2.1 Technical data
Article-Nr. 485 0001-X
Inputs:
•
1 or 2 analogue inputs (1 Control parameter or 2 Control parameters)
The particular configuration is on the shipping note, the serial number
of the transducer is on the type plate at the right hand side
of the housing.
•
2 digital inputs (static), potential-free contacts, switching current
approx. 6 mA
•
2 pulse inputs selectable to PNP/NPN (optional: static), switching current approx. 6 mA,
measurement range 0.05 Hz – 1000 Hz
Outputs:
•
2 current outputs (4 to 20 mA), active
•
2 relays with a low-voltage (only) switching capacity of 24 V / 0.5 A
•
2 relays with a switching capacity of 230 VAC / 2 A or 24 VDC / 6 A
Communications interfaces:
∗
•
RS-232 or RS-485, each with 9600 Baud, selective EMC or Modbus
or
•
CAN-bus connector for connection to the BlueBox-System
Voltage feed:
*
•
12 VDC (9 V – 18 V), received power max. 7 W
or
•
24 VDC (18 V – 36 V), received power max. 7 W
or
•
230 VAC (90 V – 260 V), received power max. 7 W
Display:
LCD Touch Panel: 240 x 128 pixels; secure temperature range -10 °C to +45 °C
Housing:
Polycarbonate, 235 mm x 185 mm x 119 mm; protection code IP65;
secure temperature range -10 ° C to +45 °
Weight:
1.35 kg
∗
The equipment of your transducer is documented on the sticker on the inside of the cover for the cable connections.
