CONTROLS AND CONECTIVITY
Fixed installation to a surface
We recommend referring the installation to qualified personnel. Some steps require the assistance of
more people. Also follow other safety instructions that are not included in this section of the manual.
• Use only a holder that complies with the specification and design of your TV.
• Make sure the surface is suitable for installation, stable and capable of supporting the weight
of the TV.
• Follow the holder manufacturer‘s instructions.
• Secure the holder to the surface by means that are suitable for the surface type and which
comply with mounting requirements of the holder´s manufacturer.
• Take extra care when installing the cable lines and ensure that the installation is safe.
2) Controls and connectivity
2.1 Control buttons
There is a panel with backup control buttons on the TV, in case a standard remote control is not avai-
lable.
Use the UP and DOWN buttons to switch the channel according to their list order or to navigate in the
displayed menu.
Use the LEFT and RIGHT buttons to adjust the audio volume or to navigate through the displayed
menu.
Press the ON/MENU button to turn on the TV from standby mode, display the menu, or confirm your
selection. Hold this button to bring up an alternative menu.
EN 6
2.2 Connectivity
Note:
The location, design, and name of each button may vary depending on your TV model.
CONTROLS AND CONECTIVITY
USB connector
- connects other USB devices.
Headphone output (Jack 3.5mm)
- connects headphones
and others audio equipment.
AV audio + video
- connects an analog source to the TV using
the included adapter.
CI+ interface
- connects a CI+ module with a decoder card
for monitoring encrypted content. More information in a separate
chapter „CI+ interface“.
HDMI
- connects the TV to other devices, eg personal computer,
DVD player, satellite receiver, etc. HDMI interface provides uncom-
pressed digital communication between devices.
Note:
The number and location of each HDMI connector will be
between them TV models vary.
Satellite input (F connector)
- connect the antenna lead
of satellite parabolic antennas.
Antenna input (IEC connector)
- connects a terrestrial antenna,
or cable television.
Optical S/PDIF output
- connects external audio devices.
EN 7
