.
PARTS LIST
QTY
PART DESCRIPTION
1
DRIVER SIDE AUXILIARY UPPER BRACKET
1
DRIVER SIDE LOWER BRACKET
1
DRIVER SIDE UPPER BRACKET
1
PASSENGER SIDE LOWER BRACKET
1
PASSENGER SIDE UPPER AUXILIARY BRACKET
1
PASSENGER SIDE UPPER BRACKET
2 VINYL
GASKET
1
WIRE GUIDE
2
M8-1.25 x 40M HEX HEAD BOLT
2
5/16" FLAT WASHER
8
1/2" FLAT WASHER
4
1/2" HEX NUT
QTY
PART DESCRIPTION
4
1/2" LOCK NUT
4
1/2" LOCK WASHER
4
1/2" TAB BOLT
4
1/2 x 1 1/4" CARRIAGE BOLT
6
3/8" FLAT WASHER
2
3/8" HEX NUT
4
3/8" LOCK NUT
2
3/8" LOCK WASHER
2 3/8"
T-BOLT
4
3/8 x 1 1/4" CARRIAGE BOLT
NOTE: READ THE ASSEMBLY AND INSTALLATION INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN.
THIS INSTALLATION REQUIRES CUTTING THE LOWER BUMPER VALANCE ON MODELS WITHOUT FACTORY TOW
HOOKS.
INSTALLATION
STEP 1.
IF THE VEHICLE IS EQUIPPED WITH FACTORY TOW HOOKS, BEGIN THE INSTALLATION ON THE PASSENGER
SIDE. LOCATE AND REMOVE THE TOW HOOK BOLT TOWARD THE FRONT OF THE VEHICLE, LOOSEN THE REAR BOLT
AND REMOVE THE TOW HOOK.
SEE DIAGRAM #1
NOTE:
IF THE VEHICLE IS NOT EQUIPPED WITH FACTORY TOW HOOKS PROCEED TO
STEP 3.
STEP 2.
POSITION THE PASSENGER SIDE LOWER BRACKET OVER THE REAR TOW HOOK BOLT, THEN RE-INSTALL THE
TOW HOOK AND FRONT BOLT. DO NOT TIGHTEN.
SEE DIAGRAM #2
REPEAT THE ABOVE PROCEDURE TO INSTALL THE DRIVER SIDE LOWER BRACKET
.
3000 SERIES STEPGUARD
GRILLE GUARD INSTALLATION INSTRUCTIONS
PART NO. 3293B & 3293M 2009 FORD F-150 2/4WD
Do not attempt to install this product on any vehicle other than the one it is designed for and listed above!
#1
#2
REMOVE TOW HOOK
TOW HOOK BOLTS
PASSENGER SIDE LOWER BRACKET
