Original instruction manual
En
8 10/2018
SWING:
Press once this button to make horizontal swing of
vertical louvers, the indicator will be displayed. Press again for
fixed air direction. To directing vertical airflow, adjust the
horizontal louvers manually.
COOLER:
Before acting this function, be sure to fill enough
water into the lower water tank.
Press this button and the water pump starts running. The water
circulates from the cooler master to allow warm air to be
converted to cool air and cooler down the temperature
effectively. If you have used
“cooler” function, when you stop
the product, the fan will be continue working for 5min to dry the
cooler master; Press the
“Off” button twice, the product will be
forced to stopped.
** For better cooling effect, ice box or ice is recommended to be
put at the upper water tank.
Note: Make sure that the water level in the water tank lies
between the “min” and “max” marks. Otherwise cooling mode
will not work.
WIND:
Press this button to select desired wind mode,
NATURE→SLEEP→NORMAL→NATURE,
in
turn.
The
corresponding wind mode indicator will be displayed.
ION:
Press once this button to release negative ions into the air,
to freshen the air and care health. Press again this button to
cancel.
TIMER:
It can be set between 1 to 9 hours, increased by 1 hour
intervals.
CLEANING AND STORAGE:
Always disconnect from main socket before cleaning the unit or
air filter.
Avoid contact with moving parts.
Use only a soft and damp cloth to clean the unit.
Do not clean the unit by spraying it or immersing it in water or
any other liquids and never allow water to drip into the housing.
