Original Instruction Manual
En
MAINTENANCE
Keep the ventilation openings clear and clean the product regularly.
If something unusual occurs during use, switch off the supply and disconnect the plug.
Inspect and repair the tool before using it again.
Repair of the tool must only be carried out by a qualified repair technician.
Repair or maintenance by unqualified personnel can lead to a risk of injury.
Use only identical spare parts for repairing a tool.
Clean the housing only with a damp cloth-do not uses any solvents! Dry thoroughly
afterwards.
Replacement of carbon brushes
The carbon brushes are expendable. It is keeping abrasion during use.
The carbon brushes should be changed regularly. In order not to damage the electrical
circuit, both carbon brushes should be changed at the same time.
CAUTION!
For this item, exchanging the carbon brushes should be done by authorized service
only.
The machine should be used only with both brushes!
STORING
Store the machine, operating instructions and where necessary the accessories in the
original packaging. In this way you will always have all the information and parts ready
to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Always keep the machine in dry place.
Instruction for abrasive wheels and discs
Stack and support wheels carefully on trucks so that they will not topple over and be
damaged. Do not pile heavy castings or tools on top of abrasive wheels.
Suitable racks, bins or compartmented drawers should be provided to accommodate
the various types of wheels used. Most plain and tapered wheels are best supported
on their edges or on a central support.
To minimise deterioration, wheels must be stored in a room which is dry and not
subject to extreme temperatures. It is recommended that wheels should be marked
with the date they are received from the supplier. Older wheels should be issued before
newer wheels and if there is any doubt, or if wheels have been in stock for more than
three years, the manufacturer should be consulted about their suitability for use.
12
01/2017
