앬
Do not remove the plug from
the socket by pulling the mains
cable.
앬
Make sure before inserting the
plug that the operating switch is
not locked.
앬
When using a cable drum
uncoil the cable completely.
Cross-section of wire at least
1,5 mm
2
.
앬
Do not overload machine.
앬
Secure all workpieces to be
processed sufficiently.
앬
Do not allow children to have
access.
앬
Make sure you have a secure
stance on ladders or scaffold-
ing when using the drill free-
hand.
앬
Localise lines with a line detec-
tor in walls where power, water
or gas lines are laid invisibly.
앬
Wear protection goggles and
use a dust mask for dust-pro-
ducing work.
앬
Always arrange for a qualified
electrician to carry out repairs
앬
Use only original replacement
parts
앬
The level of noise at the work-
place may exceed 85 dB(A). In
this case you will need to intro-
duce noise protection measu-
res for the user. The noise
generated by this electric tool
was measured in accordance
with EN 50114-1.
앬
Vibration measured on the
handle acc. to EN 50144-1.
Maintenance
앬
Always keep the drill clean.
앬
Do not use corroding agents for
cleaning plastic.
앬
Check carbon brushes in the
case of excessive sparking.
앬
Keep ventilation channels free.
GB
8
Anleitung BM 650 E SPK7 08.06.2005 15:39 Uhr Seite 8
