PROBLEM
POSSIBLE CAUSES
SOLUTIONS
Missing Parts/Accessories
1. They are wrapped up in 1. Check the tank.
the tank.
The vacuum cleaner does
1. No power at the outlet.
1. Check the power.
not start
2. Not plugged in correctly. 2. Unplug/insert the plug
into the outlet again.
3. The power cord is cut.
3. Have it replaced by an
Authorised
Customer
Service Center.
4. On/Off switch defective. 4. Have it repaired by an
Authorised
Customer
Service Center.
5. Defective Motor.
5. Have it repaired by an
Authorised
Customer
Service Center.
Dust coming out of the
1. The filter is not installed
1. Install the filter correctly.
exhaust port
or not installed correctly.
2. The filter is damaged.
2. Replace the filter.
3. The filter is clogged or
3. Use a more efficient filter.
the dust is too fine.
4. The filter doesn’t work.
4. Clean or replace the filter.
Loss of suction
1. The flexible hose fitting
1. Tighten the fitting.
is loose.
2. Filter clogged.
2. Clean or replace the filter.
3. Tank or bag full.
3. Empty or replace them.
4. Hole in the hose.
4. Replace the hose.
5. Hose or accessory
5. Check and unclog as
clogged.
necessary.
Static Shock
1. Dry environment.
1. Increase humidity. (Where
possible, use a portable or
stationary humidifier.)
2. Air’s relative humidity
2. This is temporary and does
too low.
not affect the use of
the vacuum cleaner.
Mist in exhaust air
1. The filter is saturated.
1. Clean or replace the filter.
TROUBLESHOOTING
TECHNICAL DATA
Power
1000W (1100W Max.)
Supply Voltage
230V~50Hz
Protection
IPX4
Tank capacity
16 Litres
Tank construction material
Polypropylene
Vacuum Pressure (kPa)
15,7
Weight (kg)
5,45
This tool is double insulated. There are two independent barriers of
insulation to protect you from the possibility of electric shock.
11
