The extension tubes slide one inside the other. Twist the extension
tubes to lock them in place. Attach the extension tubes to the accessory
end of the hose.
Install the cleaning accessories (as needed) onto the end of the
extension tubes.
Insert the power cord plug into a wall socket. You are now ready to use
your vacuum cleaner.
WARNING :
If the vacuum cleaner accidentally tips over, the shut-
off float mechanism may cover the joint and stop the suction. If this
happens, simply stand the vacuum upright and turn it off until the float
returns to its normal position.
VACUUMING DRY MATERIALS
In order to ensure proper filtering when vacuuming dust and dry
materials, a foam sleeve and a dust collection bag should be installed.
If the vacuum was used to vacuum up liquids, the foam sleeve must be
cleaned and dried before using it to vacuum up dust.
NOTE: NEVER USE A VACUUM WITHOUT THE FILTER!
INSTALLATION AND CLEANING
FOAM SLEEVE
WARNING :
Always ensure that the plug is disconnected from power
source, the tool is switched off before making any adjustments or
maintenance procedures. Once the motor assembly is upside down,
slide the foam sleeve down over the cage. Keep sliding it down until it
completely covers the cage.
OPERATION
8
