GO Elliptical T-300MX, User Manual

Page: 25 / 43

- 25 -
STEP 11: Attach the Bottle Holder and Power Supply
(A) Place the water bottle holder #127 on the upper upright cover #132A/B (See
Fig. 11A).and slide it downwards on to the mounting bracket aligning the
screw holes.
(B) Secure the water bottle holder to the covers using 2 x # 136 screws.
(C) Recheck that all fasteners used in assembly are tight.
(D) Connect the power supply to the power inlet on the rear of the elliptical (See
Fig. 11B)
#136 2
#92 1
Fig. 11A
Fig. 11B