Activation
Activate or deactivate your cargo. Depending on the
settings under "Settings/Access Control", you must
authorize each load using this button or an RFID card.
The cable remains locked in the standard setting until it is
disconnected from the vehicle.
Change Ampere
The charging power can be freely selected between 6-
32A. This setting always applies to all phases.
To change the default settings for the multifunction button,
go to "Settings/Button".
Automatic Stop (free update)
Set the max. kWh that you want to load into your vehicle.
Advice!
This function is very handy if you live on a mountain and
can recuperate during the downhill run, or if you are
regularly able to charge cheaper in public or at the
employer's office.
Charging Info
The overview gives you an overview of the current
charging capacity in kW and the already charged energy in
kWh.
Under the button "show more" you get detailed information
about the charge, voltage etc.
Page 16
Settings
serial serial
Displays the serial number and name of the connected
device.
badge
Define the charge levels you want to load with the button
on your go-eCharger. Input fields set to "0" are skipped
during selection with the button.
access control
If you activate this function, each charge must be approved
by means of an RFID card or the "Activation" button under
"Charging".
Cable unlock
Controls whether the cable should remain locked after
charging until it is disconnected from the vehicle, unlocked
immediately after charging or locked until it is unlocked via
the app.
Tip!
If you want to leave the Type2 cable permanently attached
to the box and there is a possibility that this could be stolen
by third parties, select the "Always locked"button.
LED Brightness
Controls the brightness of the LEDs through a slider.
LED Color
Here the LED colours for "Ready","Charging" and "Finish"
can be individually adjusted.
Page 17
TIP
TIP
Summary of Contents for go-eCharger
Page 1: ......
