Page 8
(1) Connection cable
(6) LED ring
(4) Button
(3) Housing
(5) Typ 2 socket
Page 9
(7) Fine-wire fuse on the back
Product overview
(2) Strain relief
metrical grid load.
Never cover the go-eCharger during charging. Heat accumula-
tion can lead to permanent damage or even fire.
In the event of unusual heat generation, the charging process
has to be stopped immediately.
If you notice discoloration or deformation of the plastic due to
heat generation, it is imperative that you contact the customer
service.
Use your go-eCharger exclusively in the wall mount. Never use
the charging box lying down! The type 2 connectors are not
waterproof and water could penetrate to the contacts while
lying down!
The go-eCharger is suitable for charging gassing vehicle
traction batteries only in well ventilated rooms. In case of
uncertainty, please contact your vehicle manufacturer.
The go-eCharger HOMEfix has the communication interfaces
WiFi 802.11b/g/n 2.4GHz and RFID. WiFi is operated on a
frequency of 2.4Ghz, channels 1-13 with the frequency band
2412-2472Mhz. The maximum transmission power of the WiFi
is 19.29dBm. RFID is operated on a frequency of 13.56MHz
with a maximum radiated power of 60dBµA/m at 10m.
WARNING
ATTENTION
Safety Instructions