v05/2016
16
5. CALIBRATION
To enter this mode you should be in start mode (message
WELCOME
is indicated). To calibrate depth
sensor and compass you should press key
③
and hold it for 7-8 sec
only while message WELCOME is
indicated.
Message "
Calibration mode
" appears. To select function you should use left arrows. To enter
functions you should use right key
②
-
“Set current depth as 0”. To calibrate depth sensor
you should set 0m when GNOM is on a surface.
To finish calibration press
Enter
(right key
②
). We recommend to set depth 0 in 5 minutes after
power ON.
-
“Compass Calibration”. Preinstalled. Please, use only in a case of incorrect work. To calibrate
compass you should do:
Calibration procedure:
1.
Put the GNOM on flat surface far from metal things to North directions
2.
Press circle (right key
②
) to start calibration
3.
Slowly turn the GNOM, clockwise, around own axis and not less than two turns
4.
Press circle (right key
②
) to finish calibration
-
“Joystick for left-handler”.
Do not use.
-
“Camera color adjust” . Do not use.
-
“Max vertical power”.
Set up maximal power of vertical thrusters in %.
-
“Max horizontal power”
Set up maximal power of horizontal thrusters in %.
-
“Max straight jump power”
. Set up length of straight jump
-
“Date/Time Setup”
. Set up date and time.
-
“Video systems
” . Select PAL or NTSC.
-
“Перейти на Русский”.
Select language (Russian or English).
-
“- Bereg V
x
.
xxx
-” and “- Bort V
x
.
xxx
-”
indicates version of software.
-
To return from calibration menu set the cursor to word Exit and press
Enter
(right key
②
).
Summary of Contents for Baby
Page 12: ...v05 2016 12 3 KEYS AND BUTTONS AT THE CONTROL PANEL ...
Page 13: ...v05 2016 13 3 KEYS AND BUTTONS AT THE CONTROL PANEL ...
Page 14: ...v05 2016 14 3 KEYS AND BUTTONS AT THE CONTROL PANEL ...
Page 15: ...v05 2016 15 4 SCREEN MODES ...
