CORRECTIVE AND PREVENTIVE MAINTENANCE AND
PRESERVATION
To clean the equipment, we recommend the use of “BactSpray
(Reg nº MS: 3.2079.0041.001-5) or any other similar product:
Active component: Benzalkonium chloride (tri-quaternary
ammonium)
Solution 50%................................................. 0.329%
Chemical composition: Butyl Glycol, Decyl polyglucose, Sodium
Benzoate, Sodium Nitrate, Essence, Deodorized Propane / Butane,
demineralized Water.
For more information concerning cleaning procedures, see
manufacturer’s instructions.
WARNING:
- In order to prevent risks and damages to equipment, make sure
that the liquid does not enter into the unit.
- The application of other solvent-based cleaning products or
sodium hypochloride isn’t recommended, because they may damage
the equipment.
NOTE:
The registration at the Ministry of Health of the
“BactSpray” is executed separately from the product described
in this manual, as the “BactSpray” is not manufactured by Gnatus.
NOTE:
Use gloves and other systems of protection, during the disinfection.
Disinfection
-
Use clean and soft cloth dampened in alcohol 70% to disinfection of the equipment.
- Never use corrosive disinfectants or solvents.
The cleaning procedure should be executed at the start of the working day
and after each patient. Always turn the main switch off before executing the
procedures of daily maintenance.
External cleaning:
NOTE:
The registration at the Ministry of Health of “Steel-Clean” is performed separately
from the product described in this manual, as the “Steel-Clean” is not manufactured
by Gnatus.
Product Composition:
Surfactant anionic, inorganic acid, sequestrant, preservative,
dye and vehicle.
WARNING:
After the cleaning procedure perform a complete cycle of distilling and then
eliminate the water of the reservoir and dry the tub using a clean cloth.
34
