33
NOTE: The program cannot run into the next day. The maximum duration can therefore not exceed midnight (for example,
if the start time is 20:30, the maximum duration displayed is 4 hours and the real maximum duration is 3 hours 30
minutes).
To continue the setting for 2nd time period, press OK to continue. After OK, the screen will return to the interface of day
selection for 2nd time period.
To finish the setting, press or - to find
“
FINSH
”
, then press OK to finish the setting.
Multi time periods could be used for one day.
Same time period could be used for multiple days.
NOTE:
For settings under Mode Selection (Secondary Menu) always remember to press button OK to validate the setting.
Maximum 8 time periods could be used for one program.
After manual setting for weekly program, the relevant program has done the manual setting will update the default
program setting accordingly.
Restore Factory Defaults
In the state of connecting the power plug, if there is a 01 switch, please be in the state of 1. The machine is in
standby state. (Do not turn on the power key) Then press and hold the temperature minus button
for 3-6 seconds,
and you will hear a beep. Then unplug the power, after 10 seconds, power on again to restore the factory settings.
Battery Replacement
For the first time use the protective plastic tab for the battery must be removed.
For remote control battery replacement, use a Lithium Cell CR2025 3V battery.
