22
The speed and torque settings
can be adjusted at any time by
moving the dials either clock-
wise or counter
-
clockwise. The
machine will slow instantly but
will accelerate slowly as
previously described
After 100
-
150 feet of fiber has
been installed it will be neces-
sary, as resistance increases, to
introduce airflow down the
tube. Turn the knob on the nee-
dle valve as indicated to allow
air into the system. This valve
should provide a degree of
control over the air pressure
used.
A lower pressure is beneficial at first;
with increasing distance the pressure
should be increased to maintain
installation speed. Consult the pressure
gauge for your current system
installation pressure.
WARNING
DO NOT EXCEED THE MAXIMUM
SYSTEM PRESSURE OF 15 BAR OR OPEN
THE MACHINE WHEN UNDER PRES-
SURE, SERIOUS INJURY MAY RESULT.
