GMI PS200 ABC Handbook Download Page 4

ii

AUTO BUMP / CAL STATION - HANDBOOK

hard disk provided you keep the original solely for backup and archival purposes. 

You may not copy the written materials accompanying the SOFTWARE.

3.  OTHER  RESTRICTIONS: You  may  not  rent  or  lease  the  SOFTWARE,  but 

you may transfer the SOFTWARE and accompanying written materials on a 

permanent basis to another individual. If you transfer the software, you must 

retain no copies and the recipient must agree to the terms of this agreement. 

You must not reverse engineer, decompile, or disassemble the SOFTWARE that 

is provided solely as executable programs (.EXE files) or dynamic link libraries 

(.DLL files). If the SOFTWARE is an update, any transfer must include the update 

and all prior versions.

30 DAY LIMITED WARRANTY

If the product was purchased in the UK , simply return the full product in resaleable 

condition* within 60 days of purchase to GMI, together with your original receipt or 

invoice, for a full refund. If this product was not purchased in the UK, you should 

return the full product* to the place of purchase within 30 days of purchase for 

a full refund.

LIMITED WARRANTY

The CD-ROM and Handbook that make up this software product are warranted 

by GMI to be free from defects in materials and workmanship for a period of 60 

(sixty) days from the date you purchased this product. If you notify GMI within the 

warranty period of such defects in materials or workmanship, GMI will replace 

the defective CD-ROM or handbook. The sole remedy for breach of this warranty 

is limited to replacement of defective CD-ROM and handbook and / or refund of 

purchase price and does not include any other kinds of damage. Apart from the 

foregoing limited warranty, the software programs are provided “AS IS”, without 

warranty of any kind, either expressed or implied. The entire risk as to the 

performance of the program is with the purchaser. GMI does not warrant that the 

operation of the programs will be uninterrupted or error free. GMI assumes no 

responsibility or liability of any kind for errors in the program or documentation or 

for the consequences of any such errors.

INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY MALFUNCTION, 

DEFAULT, OR OTHERWISE WITH RESPECT TO BREACH OF THIS WARRANTY 

OR ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING THOSE 

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE 

NOT THE RESPONSIBILITY OF GMI AND ARE HEREBY EXCLUDED BOTH 

FOR  PROPERTY AND,  TO  THE  EXTENT  NOT  UNCONSCIONABLE,  FOR 

PERSONAL INJURY DAMAGE. 

The remedies described above are the exclusive remedies extended to you by GMI 

for any default, malfunction or failure of the product to conform with this warranty or 

otherwise for the breach of this warranty or any other warranty, whether expressed 

or implied. Should you have any questions concerning this agreement please 

contact the GMI sales department on +44 (0)141 812 3211.
* If the product is not in resaleable condition, you will be charged a 20% restocking 

fee.

Summary of Contents for PS200 ABC

















































































Reviews: