GMI PS200 ABC, Handbook, Page: 37 / 80

3-13
VIEW / RE-CONFIGURE SOFTWARE
Gas Measurement Units
Gas measurement units for Carbon Monoxide (CO) and
Hydrogen Sulphide (H
2
S) can be displayed as either ‘ppm’
(default) or mg/m
3
. The unit type selected is reflected in Auto
Bump / Cal Station stored data and printed Test / Calibration
Certificate.
To change measurement units, a drop down list is available,
as illustrated in Fig. 3-15.
Fig. 3-15 Measurement Units
Units available for selection are as follows:
ppm (Default); mg/m
3
.
To select measurement type, position the cursor on required
unit type in list, then left click mouse button to confirm.
Selection should match instrument configuration.