LIVE STREAM
How to Use
After the setup is complete, be sure to assemble the device exactly as shown in the assembly part
of this manual.When setting up complete point the VST sensor vertically on the ground and start
the scan process.Make sure that there are no metal objects in your shoes and keep the distance
between the probe and the ground constant. also, during this procedure, the V.S.T Sensor should
point vertically towards the ground, it should not rotate or pivot or even swing. during the operation
you will see the color change in the device screen and according to the color change, the user can
know whether there is a target underground or not.
On the right side of the screen, there is 3 boxes which are:
Value:
It directly indicates the value of the signal captured by the search sensor. The colors of the
indicator change according to the change of these values.
Speed:
Use the scanner speed option to speed up / slow down the speed of the sensor scan, any
change in the speed will ask the user to press the start button to apply the new changes.
Sensitivity:
Use the sensitivity option to increase or decrease the sensitivity of the search sensor.
Any change in the sensitivity will ask the user to press the start button to apply the new options.
30
Notice
Use the Scanner Speed option to speed
up / slow down the sensor scan speed. To
use it after changing , press the start
button of the device to set it
Scan Screen
Scan value
Scan Speed
Sensitivity
