D5093-TB
- SIL3 24/220Vdc/Vac Transistor-Out Detector
G.M. International ISM0541-2
2
General Description:
The single and dual channel 24 to 220 Vac/Vdc Loop powered Switch Repeater D5093S-TB and D5093D-TB modules are units suitable for applications requiring SIL 3 level (according
to IEC 61508:2010 Ed.2) in safety related systems for high risk industries. Each channel is able to reflect the presence of a 24 to 220 Vac/Vdc input signal to the output by closing an
optically coupled NO open-drain transistor (solid-state relay, MOSFET output). The presence of the 24 to 220 Vac/Vdc input signal is also indicated by a yellow LED on the front panel.
The input switching voltage levels are selected, according to the applied input signal, by means of an internal dip-switch.
Mounting on customized Termination Boards, in Safe Area / Non Hazardous Location or in Zone 2 / Class I, Division 2.
Functional Safety Management Certification:
G.M. International is certified by TUV to conform to IEC61508:2010 part 1
clauses 5-6 for safety related systems up to and included SIL3.
Technical Data
Characteristics
Loop Input:
loop powered control signal.
Loop Supply:
24 to 220 Vac/Vdc nominal (15 to 250 Vac/Vdc), 50 mA fuse internally protected.
Current consumption:
4.5 mA/channel @ 250 Vac/Vdc nominal input.
Power consumption:
1.13 W per channel with 250 Vac/Vdc input signal.
Isolation (Test Voltage):
In/Out 2.5 KV; In/In 2.5 KV; Out /Out 500 V.
Input switching voltage levels:
ON
≥
21 Vac/Vdc, OFF
≤
15 Vac/Vdc for 24 Vac/Vdc typical input
ON
≥
40 Vac/Vdc, OFF
≤
30 Vac/Vdc for 48 Vac/Vdc typical input
ON
≥
50 Vac/Vdc, OFF
≤
35 Vac/Vdc for 60 Vac/Vdc typical input
ON
≥
100 Vac/Vdc, OFF
≤
75 Vac/Vdc for 120 Vac/Vdc typical input
ON
≥
200 Vac/Vdc, OFF
≤
160 Vac/Vdc for 220 Vac/Vdc typical input
threshold level selection by means of internal dip-switch.
Output:
voltage free SPST optocoupled open-drain transistor (solid-state relay, MOSFET output).
Open-collector rating:
50 mA at 35 Vdc (
≤
0.5 Vdc voltage drop).
Leakage current:
≤
10 µA at 35 Vdc.
Response time:
≤
120 ms.
Frequency response:
10 Hz maximum.
Compatibility:
CE mark compliant, conforms to Directive: 2014/34/EU ATEX, 2014/30/EU EMC, 2014/35/EU LVD, 2011/65/EU RoHS.
Environmental conditions:
Operating:
temperature limits – 40 to + 70 °C, relative humidity 95 %, up to 55 °C.
Storage:
temperature limits – 45 to + 80 °C.
Max altitude:
2000 m a.s.l.
Safety Description:
ATEX:
II 3G Ex ec IIC T4 Gc
IECEx / INMETRO:
Ex ec IIC T4 Gc
EAC-EX:
2Ex nA IIC T4 Gc X
CCC:
Ex nA IIC T4 Gc.
UKR TR n. 898:
2ExnAIICT4 X
Approvals:
BVS 10 ATEX E 114 X conforms to EN60079-0, EN60079-7.
IECEx BVS 10.0072X conforms to IEC60079-0, IEC60079-7.
INMETRO DNV 13.0109 X conforms to ABNT NBR IEC60079-0, ABNT NBR IEC60079-15.
UL & C-UL E222308 conforms to UL 61010-1, UL 121201 for UL and CAN/CSA C22.2 No. 61010-1-12, CSA C22.2 No. 213-17 for C-UL.
ЕАЭС
RU
С
-IT.AA87.
В
.00765/21 conforms to GOST 31610.0, GOST 31610.15.
CCC n. 2020322316000978 conforms to GB 3836.1, GB3836.8
C
Ц
16.0036 X conforms to
ДСТУ
7113,
ДСТУ
I
ЕС
60079-15.
TÜV Certificate No. C-IS-224248-01 SIL 3 conforms to IEC61508:2010 Ed. 2.
TÜV Certificate No. C-IS-236198-09, SIL 3 Functional Safety Certificate conforms to IEC61508:2010 Ed.2, for Management of Functional Safety.
Mounting:
On customized Termination Board.
Weight:
about 115 g D5093D-TB, 105 g D5093S-TB.
Connection:
by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm
2
.
Location:
installation in Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4 or Class I, Division 2, Group A,B,C,D, T4.
Protection class:
IP 20.
Dimensions:
Width 12.5 mm, Depth 123 mm, Height 120 mm.
FSM
SIL 3
