Technology for safety
15
D5000 - D5200 Series
- Intrinsically Safe Isolators and Safety Relays
Fig. 4
T35 DIN-Rail
Pull the Termination Board upwards
and remove from DIN-Rail
Termination Boards characteristic
Suitable to accept up to 8/16 D5000 or D5200 modules 12mm/22mm wide.
24 Vdc Power supply terminal blocks can be disconnected from the board without disconnecting the power to other boards connected in series.
Boards are available with custom connectors for any system / PLC / DCS.
Supply line 1
Supply line 2
Output connector
Hart Multiplexer connectors
Up to 8/16 D5000/D5200 modules
Spare fuse
Common fault output signal
Supply paralleling diodes
Power ON LEDs 1 - 2
Removing
To remove a Termination Board from the mounting rail, insert a blade screwdriver in the mounting foot and lever as shown in Fig.3.
Fig. 3
T35 DIN-Rail
Screwdriver
