37
MAINTENANCE
Replacing the Dust Filter
Cotton particulate (dust) fi lters, minimise the danger of dust ingress.
Removing the inlet nozzle allows access to the dust fi lter.
1.
Using a small coin or appropriate sized flat bladed screwdriver, remove the inlet nozzle.
2.
Remove the dust fi lter from the inlet nozzle.
i
The dust fi lter should be removed for inspection periodically.
3.
Clean the inlet nozzle to make sure it’s free from dirt and water.
4.
Fit a new dust fi lter into the inlet nozzle.
5.
Fit the inlet nozzle.
i
Ensure the inlet nozzle screw thread is correctly located, before fi tting.
!
The GS700 must never be switched on without suitable fi lters installed.
Inlet Nozzle
Dust Filter
