XRS-330C
20
To recall a priority channel:
Briefly press the
PRI
key. The radio will immediately switch to the Priority channel
and the ‘PRI’ icon will be displayed.
NOTE
: If the radio was scanning when the Priority channel was recalled, the scan
will be cancelled.
SCANNING
Your radio incorporates a scan function allowing selected groups of channels to be
scanned for signals. Channels can be scanned at a rate of 50 channels per second.
When a signal is found, scanning will pause to allow the signal to be heard then
resume scanning when the channel is clear again.
SCAN GROUPS
Your radio supports three scan groups:
•
Open Scan:
Allows you sequentially scan from 2 to 80 user-selectable
CB channels.
•
Priority Scan:
Allows you constantly monitor your priority channel
while scanning a group of user-selectable CB channels.
•
Network Scan:
Allows a group of radio users to maintain
communications even when the band is congested by monitoring
a small group of user selectable channels. If the operating channel
becomes busy with users from outside your group, Net-Scan will
automatically select a new free channel from the scan group and
transparently switch all users in your group to the new channel.
To select open scan/priority scan/network scan:
1.
Press the
MENU
key.
2.
Navigate to select
SCAN SETTINGS
, and the required scan option.
