GR300BT
INSTRUCTION MANUAL
5
LCD Display
FM Bands
AM Bands
Frequency and Status
Auxiliary Input
OPERATION
ON/OFF
To switch the GR300BT ON, briefly press the key.
To switch the GR300BT OFF, press and hold the key.
Note:
When the GR300BT is switched off, it will remember the last state it was set to
and return to that state when switched back on.
CLOCK
When the GR300BT is switched off, the LCD will (by default) display the time for as
long as the power remains connected. When the GR300BT is switched on, the LCD
will normally display the radio settings, but can be manually switched between the
radio and the clock. To toggle the display between the radio and the clock, briefly
press the
DIS
key.
Note:
If any of the radio function keys are pressed while the LCD is in clock mode,
the LCD will temporarily switch back to the radio display to allow you to make
adjustments and set stations and frequencies. The LCD will then return to the clock
mode after a few seconds.
Setting the Time
1. Briefly press the
DIS
key to switch to the clock display.
2. Hold the
DIS
key until the ‘Hours’ flash.
3. Rotate the
Control Knob
left or right to adjust the hours. Rotate right to step
forward or left to step backwards.
4. Once the Hours have been set, briefly press the
DIS
key. The ‘Minutes’ will flash.
5. Rotate the
Control Knob
to adjust the minutes. Rotate right to step forward or
left to step backwards.
6. Briefly press the
DIS
key again to exit and display the time.
Local/DX
Loudness
Stereo
kHz
MHz
Auto Music Search
Preset Memories
Treble
Bass
Balance
AUX
