www.gmetechnology.com
2
This 8-Digit LCD display shows input/output frequency value information.
4.
Frequency Unit Display
These indicators will light to show the unit for the frequency value currently displayed on the 8-
Digit LCD screen (i.e. MHz, KHz, Hz).
5.
Output Waveform Type Display
These indicators will light to shows the type of waveform being on OUTPUT
BNC connector
(i.e.
sine wave, triangle wave or square wave).
NOTE: The fixed 5V p-p square wave is always being
output on the
SQUARE
BNC output connector.
6.
SQUARE BNC output connector
Outputs the fixed 5V p-p square waveform of selected frequency.
7.
OUTPUT BNC output connector
Outputs either sine, triangle or square waveform of selected frequency depending on the output
waveform type selected.
8.
Amplitude Control Knob for Sine/Triangle/Square Waveform
The amplitude control knob is on the right side of the unit and is used to adjust the level of the
sine/triangle/square waveform output.
9.
DC Offset Control Knob
The offset control knob is on the left side of the unit and is used to adjust the level of the DC offset
on the OUTPUT BNC connector.
10.
Modify Keys
Use the left/right modify keys to select the desire digit on the LCD display to modify; use the
up/down modify keys to increment/decrement the value of the selected digit.
11.
SHIFT Key Status LED
Press the SHIFT key to turn this LED ON/OFF. When this LED is on, the secondary function of
some keys on the keypad is activated.
12.
Input Keypad
Use to key in desire frequency value and the frequency unit (i.e. MHz, KHz, and Hz).
13.
Secondary Key Function
Shows the secondary functions of some keys on the keypad; the secondary function is activated by
first pressing the SHIFT key follow by the function key.
14.
Offset Switch
Sliding the switch to turn the DC Offset on or off.
15.
Output Switch
Sliding the switch to select the output waveform on the OUTPUT BNC connector.
Summary of Contents for FG-3005
Page 1: ...GME User Manual Rev 1 0 ...
