GME Electrophone TX4200 Series, Instruction Manual

Page: 25 / 33

25
Channel Memories
Pre-programmed Open Scan (OS) Channels:
Pre-programmed Group Scan (GS) Channels:
Pre-programmed Priority Channel:
Pre-programmed Duplex Channels:
Selcall.
Selcall Enabled/Disabled:
Pre-programmed Receiver IDENT:
Pre-programmed Selcall Memories (M1 - M3):
Enable/Disable reception of Group Calls:
Allow reception of Group Calls of up to 10 radios:
Allow reception of Group Calls of up to 100 radios:
Enable/Disable transmission of Group Calls:
Allow transmission of group Calls to 10 radios:
Allow transmission of group calls to 100 radios:
Allow reception of full 5 digit appended Ident:
Allow transmission of full 5 digit appended Ident
Quiet Function
Pre-programmed Quiet channels:
Open receiver when Selcall received:
Re-enter Quiet mode after 10 seconds if no response:
Paging
Pre-programmed Page Ident:
Enable/Disable Page function:
Pre-programmed Page Channel:
Group Scan Mode
Either -
Enable Group Scan mode:
Or
- Enable Call Waiting mode:
(Cannot have both enabled or disabled at the same time)
All
None
Ch 40
Ch 1-8
Enabled
1XXXX
None
Enabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
None
Enabled
Disabled
1XXXX
Enabled
Ch 23
Enabled
Disabled
Yes
Yes
Yes
Yes
No
No
Yes
No
No
No
No
No
No
No
No
Yes
No
No
Yes
No
No
No
No
FUNCTION
FACTORY USER DEALER
SETTING PROG. PROG.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
The TX4200 is provided with a wide variety of
programmable functions. During the
development of the TX4200, extensive research
was conducted to identify specific user
requirements and shortfalls in current UHF
transceiver technology. The result is a
transceiver that can be optioned to meet a wide
range of applications and personal tastes.
Many of these options can be selected directly
by using the TX4200’s controls. However, some
options can only be set using an external
programmer.
The following is a list of available options
indicating which are user selectable and which
are dealer programmable. The initial factory
settings are also indicated. Below the list are
descriptions of how to use those options which
are not factory defaults (operation of the factory
default options are already described in this
manual).
DEALER PROGRAMMABLE
OPTIONS