5-25
2. With the UP marking on the ratchet facing you,
rotate the ratchet clockwise. That will lift the jack
head a little.
3. If your vehicle has
wheel nut caps, use the
wheel wrench and
ratchet to remove them.
Turn the wheel wrench
counterclockwise, with
DOWN facing you, to
remove the wheel
nut caps.
4. Then take off the hub cap.
5. If the wheel also has a trim ring, use the wheel
wrench to pry along the edge and remove it.
6. If the wheel has a smooth center piece, place the
wheel wrench in the slot on the wheel and gently
pry out.
Summary of Contents for Sierra 2000
Page 1: ......
Page 130: ...2 62 Instrument Panel Your Information System...
Page 272: ...5 38 NOTES...
Page 413: ...7 64 Maintenance Record DATE ODOMETER READING SERVICED BY MAINTENANCE PERFORMED...