GMC Sierra 2000, Owner'S Manual

Page: 249 / 426

5-14
NOTICE:
When adding coolant, it is important that you use
only DEX
-
COOL
R
(silicate
-
free) coolant.
If coolant other than DEX
-
COOL is added to the
system, premature engine, heater core or
radiator corrosion may result. In addition, the
engine coolant will require change sooner
--
at
30,000 miles (50 000 km) or 24 months,
whichever occurs first. Damage caused by the use
of coolant other than DEX
-
COOL
R
is not
covered by your new vehicle warranty.
If there seems to be no leak, start the engine again.
See if the engine cooling fan speed increases when idle
speed is doubled by pushing the accelerator pedal down.
If it doesn’t, your vehicle needs service. Turn off
the engine.
How to Add Coolant to the Coolant
Recovery Tank (Gasoline Engines)
If you haven’t found a problem yet, but the coolant level
isn’t at or above the COLD mark, add a 50/50 mixture
of clean, drinkable water and DEX
-
COOL
R
engine
coolant at the coolant recovery tank. (See “Engine
Coolant” in the Index for more information.)
CAUTION:
Adding only plain water to your cooling system
can be dangerous. Plain water, or some other
liquid like alcohol, can boil before the proper
coolant mixture will. Your vehicle’s coolant
warning system is set for the proper coolant
mixture. With plain water or the wrong mixture,
your engine could get too hot but you wouldn’t
get the overheat warning. Your engine could
catch fire and you or others could be burned.
Use a 50/50 mixture of clean, drinkable water
and DEX
-
COOL
R
coolant.