GMC GPM1600 Original Instructions Manual Download

Page: 6 / 40

General Safety

WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious
injury.
WARNING: This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children must be supervised to ensure that they do not
play with the appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
  flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
  cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not
  use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
  matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
  ranges and refrigerators. There is an increased risk of electric shock if your body is
  earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will
  increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
  power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
  entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a
  power tool. Do not use a power tool while you are tired or under the influence of
  drugs, alcohol or medication. A moment of inattention while operating power tools may
  result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
  equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used
  for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
  connecting to power source and/or battery pack, picking up or carrying the tool.
  Carrying power tools with your finger on the switch or energising power tools that have the
  switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a
  key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
  control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
  and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught
  in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities,
  ensure these are connected and properly used. Use of dust collection can reduce dust-
  related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The
  correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
  cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power
  tool before making any adjustments, changing accessories, or storing power tools.
  Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
  unfamiliar with the power tool or these instructions to operate the power tool. Power
  tools are dangerous in the hands of untrained users.
e)  Maintain power tools. Check for misalignment or binding of moving parts, breakage
  of parts and any other condition that may affect the power tool’s operation. If
  damaged, have the power tool repaired before use. Many accidents are caused by poorly
  maintained power tools.
f)  Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
  edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
  instructions, taking into account the working conditions and the work to be
performed.

Use of the power tool for operations different from those intended could result

in a hazardous situation.
WARNING: When used in Australia or New Zealand, it is recommended that this tool is
ALWAYS supplied via Residual Current Device (RCD) with a rated residual current of 30mA
or less.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.

Additional Safety Information for Mixing

Machines

• This machine is designed for mixing water-based liquids with powdered building materials

including, but not limited to thinset, sealing and levelling compounds, cement, grout,
textured coatings, etc.

• With the correct accessory attached, this tool may be used to blend dispersion paints,

varnish, resins and other coatings

• This machine is NOT intended to be used with dusty compounds such as graphite, or with

salt solutions, corrosive agents or liquid manure

• This product does NOT satisfy food hygiene standards and is NOT to be used for

preparing food or as a kitchen appliance

• Always use the CORRECT mixing paddle or accessory for the material being mixed.

Working with an incorrect accessory might overload the tool and lead to spillage,
insufficient blending or personal injury