1. Cord protector
2. Wire loop
3. On/off switch
4. Variable speed dial
5. Spindle lock button
6. Collet nut
7. Collet
8. Brush caps
9. Collet cover
8
8
6
7
4
2
1
5
3
135W
AC ROTARY
TOOL
DEC003AC
9
Full 2 years home use warranty
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase. If
found to be defective in materials or workmanship, the tool
or the offending faulty component will be replaced free of
charge with another of the same item. A small freight
charge may apply.
The warranty replacement unit is only made available by
returning the tool to the place of purchase with a confirmed
register receipt. Proof of purchase is essential. We reserve
the right to reject any claim where the purchase cannot
be verified.
This warranty does not include damage or defects to the tool
caused by or resulting from abuse, accidents, alterations or
commercial or business use.
It also does not cover any bonus accessories unless the tool
is a GMC Platinum Professional model.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty.
If you need direction of what constitutes a free of
charge warranty claim, please review the guide given on the
rear of the Receipt Holder. An indication is given as to the
types of claim that are permissible, and those that are not.
Dear customer
If you require any help with your product, whether it is a
Warranty claim, spare part or user information, please phone
our Help Line for an immediate response.
Phone
1300 880 001
in Australia
or
0800 445 721
in New Zealand.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Caution
Carefully read through this entire Instruction Manual before
using your new GMC Power Tool. Take special care to heed
the Cautions and Warnings.
Your GMC power tool has many features that will make your
job faster and easier. Safety, performance, and dependability
have been given top priority in the development of this tool,
making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to the
local recycling centre and disposed of in an
environmentally safe way.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
M8 Spindle
thread for Collet nut
Read instruction manual
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Input power:
135W
Power supply:
230-240V ~ 50 Hz
No load speed:
15000-35000min
-1
Collet size:
Ø 2.4mm and Ø 3.2mm
M8 spindle
Max. Drill
Ø 3.2mm
Max. Grinding disc
Ø 25 x Ø 2mm
Cord length:
1.8 metres
Tool weight:
0.7 kg
Flexible shaft length:
1.0 m
Sound pressure level:
83 dB(A)
Sound power level:
96 dB(A)
Vibration:
0.482 m/s
2
Safety instructions
WARNING.
Read and understand all instructions.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term “power
tool” in all of the warnings below refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Save these instructions
Work area
•
Keep work area clean and well lit.
Cluttered and dark
areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust
. Power tools create sparks which
may ignite the dust or fumes.
•
Keep children and bystanders away while operating a
power tool
. Distractions can cause you to lose control.
Electrical safety
•
If cordset is damaged have it replaced by an authorised
service centre.
•
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
•
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions
.
Water entering a power tool will increase the risk of
electric shock.
•
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
•
When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use
.
Use of a cord suitable for outdoor use reduces the risk of
electric shock.
Personal safety
•
Stay alert, watch what you are doing and use
common sense when operating a power tool
. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
•
Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid safety
shoes, hard hat, or hearing protection use.
• Avoid accidental starting
. Ensure the switch is in the
off-position before plugging in. Carrying power tools with
your finger on the switch or plugging in power tools that
have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the tool on
. A wrench or a key that is left
attached to a rotating part of the power tool may result
in personal injury.
• Do not overreach.
Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
•
Dress properly
. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
•
If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used
. Use of these
devices can reduce dust-related hazards.
Power tool use and care
•
Do not force the power tool.
Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
•
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands of
untrained users.
•
Maintain power tools.
Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power tool
for operations different from intended could result in a
hazardous situation.
Service
•
Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Additional safety instructions for
rotary tools
• Do not use a disc marked with a lower RPM than that of
the maximum no load speed shown on the rating label
• Always wear eye, ear and breathing protection
• Do not apply too much pressure when grinding, cutting, etc
• Keep your hands well clear of the cutting devices
WARNING.
The use of an accessory or attachment, other
than those recommended in this Instruction Manual, may
present a risk of personal injury.
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who use
and service the machine have to be acquainted with this
Manual and must be informed about its potential hazards.
Children and infirmed people must not use this tool.
Black
Code:
DEC003
Date:
060113
Edition:
11
Op:
DCR
