![background image](http://html1.mh-extra.com/html/gmc/bl5000a/bl5000a_instruction-manual_2235613005.webp)
5
and perform its intended function. Check for alignment
of moving parts, free running of moving parts, breakage
of parts, proper mounting and any other conditions
that may affect the operation of the tool. A guard or
other part that is damaged should be properly repaired
or replaced by an authorised service facility, unless
otherwise indicated in this Instruction Manual.
Defective switches must be replaced by an authorised
service facility. Do not use a tool if the switch does not
turn the tool on and off correctly.
17. Use only approved parts.
When servicing, use only
identical replacement parts. Use an authorised service
facility to fit replacement parts.
Additional safety Instructions
1. This appliance is not intended for he use by young and
infirm person unless have been adequately supervised
by a responsible person to ensure that they can use the
appliance safely.
Young children should be supervised to ensure that they
do not play with the appliance.
2. Before use check the supply and extension cord of signs
of damage or aging. If the cord becomes damaged during
use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY. Do not use the appliance if the cord is
damaged or worn.
Additional safety rules for blowers
1. Always wear adequate protective clothing when operating
the tool to avoid injuries to face, eyes, hands, feet, head
or hearing. Use safety glasses or a face shield, high
boots or sturdy shoes, long trousers, work gloves, a hard
hat and ear defenders.
2. Do not start the tool when it is upside down or when it is
not in the operating position.
3. Switch the motor off and remove the plug when the tool
is not being used, left unattended, being cleaned, being
moved from one place to another or when the extension
cord is entangled or damaged.
4. Use only outdoor rated extension leads that are so
marked. Keep the extension cord away from heat, oil
and sharp edges.
5. Do not operate the tool near people, especially children
or pets. Turn it off if they get too close. Maintain a safe
distance of at least 5m from other people when using
the tool.
6. Never direct the blower tube towards bystanders or pets.
Never blow debris in the direction of bystanders or pets.
7. Do not handle the plug or the tool with wet hands and do
not use the tool in the rain.
8. Ensure that the extension lead is secured in a manner
that prevents it form disconnecting from the plug whilst
in use.
9. Keep all the air intakes and the blower tube free of dust,
lint, hair and other material that may cause a reduction in
air flow.
10. Keep a balanced and stable stance while using the tool.
11. Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses
and powders.
12. Only operate the tool during broad daylight or with
adequate artificial light.
13. When the tool is not in use, store it in a dry place and
out of reach of children.
14. After use, disconnect the tool from the power supply
and check for damage. If you have the slightest doubts,
contact an authorised service centre.
15. Only use the tool according to the instructions given in
this manual.
16. Check regularly that the screws are tight.
17. Use only spare parts and accessories recommended by
the manufacturer.
18. Do not try to repair the tool or access internal parts.
Contact authorised service centres only.