background image

Description of symbols

The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.

Wear hearing protection. 
Wear eye protection. 
Wear breathing protection.

Conforms to relevant standards for
electromagnetic compatibility.

Specifications

Parameter

Model AC24L

Model AC40L

Power

2hp/1.5kW

2.5hp/1.8kW

Voltage

230–240Vac ~ 50Hz

No load speed

2850 RPM

2850 RPM

Current

7A  

8A

Output at 0.8MPa 
(115psi)

0.1m3/min

Discharge pressure 0.8MPa (115psi)
Restart pressure

0.5MPa (70psi)

Tank capacity

24 litres

40 litres

Air outlet size

6.35mm (1/4”)

Dimensions

600mm x 360mm  685mm x 300mm 
x 640mm

x 720mm

Net weight

27kg

35kg

Cut-in pressure (factory set)

0.6MPa (85psi)

Cut-out pressure (factory set) 0.8MPa (115psi)
Maximum output pressure

0.8MPa (115psi)

Free air delivery

117 l/min (4.15 cfm)

Pump displacement

206 l/min (7.3 cfm)

4

Dear Customer

If you require any help with your product, whether it 
is a Warranty claim, spare part or user information, 
please phone our Help Line for an immediate response. 
Phone 1300 880 001 in Australia or 0800 445 721 in 
New Zealand.

Introduction

Your new GMC power tool will more than satisfy your 
expectations. It has been manufactured under stringent 
GMC Quality Standards to meet superior performance 
criteria.
You will find your new tool easy and safe to operate, 
and, with proper care, it will give you many years of 
dependable service.

Caution.

 Carefully read through this entire Instruction 

Manual before using your new GMC Power Tool. Take 
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make 
your job faster and easier. Safety, performance, and 
dependability have been given top priority in the 
development of this tool, making it easy to maintain 
and operate.

Environmental protection

Recycle unwanted materials instead of 
disposing of them as waste. All tools, hoses 
and packaging should be sorted, taken to 
the local recycling centre and disposed of 
in an environmentally safe way.

Summary of Contents for AC24L

















Reviews: