Model No. 8047D, 8048D, 8049D, 8050D, 8051D
Electric Fryers
8066, 8068, 8068FL, 8073, 8073BF, 8075
Page 14
gmpopcorn.com
Care and Cleaning
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water.
DO NOT clean appliance with a water jet.
Always unplug the equipment before cleaning or servicing.
025_111616
WARNING
Hot surface and hot oil inside unit. DO NOT touch! Always allow unit to cool
before cleaning, servicing, or draining oil.
026_031914
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only
use non-toxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of
advertising your product.
Follow the directions below to clean and sanitize the unit each day after use.
1.
With the machine OFF, unplug the unit and allow it to cool before attempting to clean
it after use.
DO NOT move this unit when filled with oil!
Allow hot cooking oil to cool below
140°F before attempting drain the unit.
2.
Make sure to clean all pans/accessories in order to sanitize them before each use.
3.
Make sure the drain valve is securely closed and the drain plug is fully tightened into
place, then fill the tank with water to the MINIMUM oil level.
DO NOT FILL above the
minimum oil level or equipment damage may occur.
4.
Add appropriate amount of dish soap. [To deep clean a tank which has a build-up of
cooking oil, instead of soap, add appropriate amount of Gold Medal’s Heat’n Kleen
(Item No. 2095) per amount of water used (see Heat’n Kleen product instructions)].
5.
Bring solution to a boil
(DO NOT heat above 250°F)
, then turn the machine OFF,
unplug the unit and allow solution to cool to below 100°F.
6.
Once cooled, drain and remove all solution.
7.
Clean the outside of the unit with a soft cloth, dampened with soap and hot water.
8.
Wipe the stainless steel parts with a clean cloth and cleaner designed for stainless
steel, such as Gold Medal Watchdog Stainless Cleaner (Item No. 2088).
DO NOT
use oven cleaners or abrasive materials as they will damage parts of the
machine.
9.
Thoroughly dry the unit after cleaning, including inside any drain valves.
