manualshive.com logo in svg

GMC 2001 Savana, Owner'S Manual, Page: 346 / 412

Share
Download
GMC 2001 Savana Owner'S Manual Download Page 346

Scheduled Maintenance

7-7

Long Trip/Highway Definition

Follow this scheduled maintenance only if none of the
conditions from the Short Trip/City Scheduled
Maintenance are true. Do not use this schedule if the
vehicle is used for trailer towing, driven in a dusty area
or used off paved roads. Use the Short Trip/City
schedule for these conditions.

Driving a vehicle with a fully warmed engine 
under highway conditions causes engine oil to 
break down slower.

Long Trip/Highway Intervals

Every 7,500 Miles (12 500 km): Engine Oil and Filter

Change (or every 12 months, whichever occurs first).
Chassis Lubrication (or every 12 months, whichever
occurs first). Drive Axle Service. Tire Rotation.

Every 15,000 Miles (25 000 km): Gasoline Engine

Only: Noise Shields Inspection (GVWR above
10,000 lbs. only). Diesel Engine Only: Shields and
Underhood Insulation Inspection. Diesel Engine
Only: Thermostatically Controlled Engine 
Cooling Fan Check (or every 12 months, whichever
occurs first). Diesel Engine Only: Air Intake 
System Inspection.

Every 30,000 Miles (50 000 km): Fuel Filter

Replacement. Diesel Engine Only: Engine Air
Cleaner Filter Replacement. Front Wheel 
Bearing Repack (or at each brake relining, 
whichever occurs first).

Summary of Contents for 2001 Savana





























































































































































































































































































































































































































Reviews:

No comments