background image

5-11

If No Steam Is Coming From Your Engine

If you get an engine overheat warning but see or hear no
steam, the problem may not be too serious. Sometimes
the engine can get a little too hot when you:
D Climb a long hill on a hot day.
D Stop after high

-

speed driving.

D Idle for long periods in traffic.
D Tow a trailer. See “Driving on Grades” in the Index.
If you get the overheat warning with no sign of steam,
try this for a minute or so:

1. If you have an air conditioner and it’s on, turn it off.

2. Turn on your heater to full hot at the highest fan

speed and open the window as necessary.

3. If you’re in a traffic jam, shift to NEUTRAL (N);

otherwise, shift to the highest gear while 
driving 

--

 DRIVE (D) or THIRD (3).

If you no longer have the overheat warning, you can
drive. Just to be safe, drive slower for about 10 minutes.
If the warning doesn’t come back on, you can 
drive normally.

If the warning continues, pull over, stop, and park your
vehicle right away.

If there’s still no sign of steam, push down the
accelerator until the engine speed is about twice as fast
as normal idle speed for at least three minutes while
you’re parked. If you still have the warning, turn off the
engine and get everyone out of the vehicle
 until it 
cools down.

You may decide not to lift the hood but to get service
help right away.

Summary of Contents for 2001 Savana





























































































































































































































































































































































































































Reviews: