GMC 2001 Jimmy Owner'S Manual Download

Page: 188 / 448

3-20

CD Adapter Kits

It is possible to use a portable CD player adapter kit
with your cassette tape player after activating the bypass
feature on your tape player.

To activate the bypass feature, use the following steps:

1. Turn the ignition to RUN or ACCESSORY.

2. Turn the radio off.

3. Press and hold the TAPE AUX button for five

seconds. The tape symbol on the display will flash
for two seconds, indicating the feature is active.

4. Insert the adapter into the cassette slot. It will

power up the radio and begin playing.

This override routine will remain active until EJECT
is pressed.

AM-FM Stereo with Cassette Tape Player
(Bose

) (If Equipped)

Included with the AM

FM Stereo with Cassette Tape

Player are six Bose

high performance speakers and a six

channel Bose amplifier. Please see your dealer for details.

Playing the Radio

PWR

VOL: Press this knob to turn the system on

and off. To increase volume, turn the knob clockwise.
Turn it counterclockwise to decrease volume. The knob
is capable of being turned continuously.

Summary of Contents for 2001 Jimmy
































































































































































































































































































































































































































































Search results

Summary of Contents for 2001 Jimmy

Reviews:

Related manuals for 2001 Jimmy

Brands by name

Popular brands

GMC 2001 Jimmy, Owner'S Manual

Search results

Summary of Contents for 2001 Jimmy

Reviews:

Related manuals for 2001 Jimmy

Brands by name

Popular brands