manualshive.com logo in svg

GMC 2001 Jimmy, Owner'S Manual, Page: 71 / 448

Share
Download
GMC 2001 Jimmy Owner'S Manual Download Page 71

2-3

Manual Windows

Turn the hand crank on each door to raise or lower your
manual side door windows.

Power Windows (If Equipped)

If you have power windows, the controls are located on
the armrests on each of the side doors. The switches
operate the windows when the ignition is RUN,
ACCESSORY or when Retained Accessory Power
(RAP) is active. (See “Retained Accessory Power” in 
the Index.) The driver’s door has a switch for the
passenger windows as well.

Press the side of the switch with the down arrow to
lower a window. Press the side of the switch with the 
up arrow to raise the window.

Summary of Contents for 2001 Jimmy

































































































































































































































































































































































































































































Reviews:

No comments