18
Installation requirements
Electrical requirements
Main power outlet
Provide an mains power-outlet with an electrical plug lockout close to the installation site. The table
showing "Power supply requirements" on the facing page indicates the applicable power supply types.
WARNING:
Electrical installation, all cabling and cabling connections, fusing and isolation must
conform to local and/or national regulations and guidelines.
WARNING
HIGH LEAKAGE CURRENT
EARTH CONNECTION ESSENTIAL
BEFORE CONNECTING SUPPLY
AVERTISSEMENT
COURANT DE FUITE ÉLÉVE
RACCORDEMENT Á LA TERRE INDISPENSABLE
AVANT DE RACCORDEMENT AU RÉSEAU
Power cable
NOTE:
The cable for the main power connection is included with the equipment.
WARNING:
The equipment is Class 1 equipment. Therefore, the equipment must be connected to
earth to avoid electrical shocks.
Please be aware of double pole/neutral fusing.
CAUTION:
The conductors in the power supply cable should be of copper.
Provide for additional cable protection, e.g. cable covers, if cable is exposed to heavier transport
such as fork-lift trucks etc.
WARNING:
Connection to mains shall be permanent connection.
Connection via wall plug isn't allowed.
Pre-installation Guide
|
Flex-i-Line 520 (XP) Dry/Compact/Standard/Max
May, 2022
Summary of Contents for Flex-i-Line 520
Page 2: ...2 Blank Pre installation Guide Flex i Line 520 XP Dry Compact Standard Max May 2022 ...
Page 6: ...Pre installation Guide Flex i Line 520 XP Dry Compact Standard Max May 2022 ...
Page 12: ...Pre installation Guide Flex i Line 520 XP Dry Compact Standard Max May 2022 ...
Page 20: ...Pre installation Guide Flex i Line 520 XP Dry Compact Standard Max May 2022 ...