Champ
™
3 & Champ
™
5 Hot Melt Glue Gun
Glue Machinery Corporation™
4234 Boston St, Baltimore, Maryland 21224
Toll Free 1-888-202-2468 | Phone: 410-761-2727 | Fax: 410-761-5127 | Email:
7
Start-up and Operation
To avoid risk of tripping/falling:
Lay all instrument connections (cable, hoses, and lines) so that they do not cause any risk of stumbling (cable
conduits, bridges)!
Operation of the Glue Gun
Plug connecting cable of the Champ™3/Champ™5 Glue Gun into socket with ground contact.
Glue Gun Champ™3
The Champ
™
3 gun is fixed to a temperature of 190ºC and, thus, appropriate for all the glue granulates normally
used.
For special granulates, use a screw driver to adjust the temperature accordingly, at the rear side of the gun. The
maximum temperature of 200ºC is set at the proper stop limit.
Glue Gun Champ™5
Adjust working temperature requested. The temperature of the Champ™5 Glue Gun is adjustable between approx.
70 and approx. 190°C. For this, set rotary button to the desired position:
4
≅
approx. 70 °C
10
≅
approx. 160 °C
6
≅
approx. 100 °C
12
≅
approx. 190 °C
Minor leaking during heat-up is due to hot melt expanding in the nozzle/heating chamber.
Warning: Once the gun has warmed up, nozzle and cover are extremely hot!
Never work without wearing protective gloves!
Loading of Glue
- The
Champ
™
3/Champ
™
5 Glue Gun is designed for applying solvent-free hot melts. Never fill the gun with
other materials. The hot-melt glue gun can work with all the types of hot melts that are designed for working
temperatures of up to max. 200 °C.
-
As soon as the gun has warmed up (approx. 10 min.), open cover and fill granulate into the gun until it fills just
under the rim of the charging hole.
-
Close cover and allow some time for the glue gun to melt the glue (approx. 10 min. depending on type of glue).
-
The quantity to be applied can be determined by pressing the trigger: the longer you press, the more glue
comes out.
The cover must only be opened when the gun has warmed up!
